What are the operating specifications for the lens cleaning of the laser cutting machine?

The lenses used in the laser cutting machine are divided into many types, such as focusing lenses, protective lenses, etc. It is unavoidable that they will be polluted during their work, such as water pollution or dust pollution, etc., so the laser needs to be treated in the daily maintenance process. The lens is cleaned to ensure the stability of the laser cutting machine. Of course, cleaning the lens is not the same as the clear eyeglasses in our lives. Special attention is needed. This article explains the correct cleaning method for the laser lens in the laser cutting machine. In the process of cleaning the lens, the only purpose is to remove the contaminants of the lens, and not to cause further pollution and damage to the lens.

During the installation and cleaning of the lens, any sticky matter, or even oil droplets printed on the nails, will increase the absorption rate of the lens and reduce the service life. Therefore, the following precautions must be taken:

1. Never install the lens with bare fingers. Wear finger cots or rubber gloves.

2. Do not use sharp instruments to avoid scratches on the surface of the lens.

3. Do not touch the film when taking the lens, but hold the edge of the lens.

4. The lens of the laser cutting machine should be placed in a dry and tidy place for inspection and cleaning. A good workbench should have several layers of cleaning paper towels and several sheets of lens cleaning tissue on the surface.

5. The user should avoid talking above the lens, and keep food, beverages and other potential contaminants away from the work environment.