Views: 0 Author: Site Editor Publish Time: 2022-04-25 Origin: Site
How to adjust mirror on metal nonmetal laser cutting machine
1.Fix a piece of acrylic in front of the third mirror.
2.Move the laser head to upper left corner
3. Press “Pulse” to get a laser dot on the acrylic
4.Observe the first dot position
5.Move the laser head to the bottom left corner
6.Press”Pulse” to get another laser dot on acrylic
7.Check the second laser dot position compared to the first laser dot
8.Adjust the screws on the first mirror mount,to move second laser dot to first laser dot position
9.Move the laser head to the upper left corner,and fix a new acrylic in front of the third mirror
10.Press”Pulse”to get a laser dot on acrylic
11.Observe the first laser dot position
12.Move the laser head to the bottom left corner
13.Press”Pulse”to get a another laser dot on acrylic
14. Check if the 2 laser dots are in exactly the same position
If they overlap,proceed the next step.If they do not overlap,repeat step 1 to step 14 till they overlap exactly
15.Move the laser head to the bottom right corner .
16. Press”Pulse”to get the third laser dot on acrylic
17.Check the third laser dot position compared to the second laser dot
18.Adjust the screws on the second mirror mount,to move the third laser dot to the second laser dot position
19.Move the laser head to bottom left corner
20. Press”Pulse”to get a laser dot on acrylic
21.Observe the second laser dot position
22.Move the laser head to bottom right
23. Press”Pulse”to get a laser dot on acrylic
24.Check if the third laser dot and the second laser dot are in same position
If they overlap,proceed the next step.If they do not overlap,repeat step 15 to step 24 till they overlap exactly
25.After above adjustment,check if all three laser dots are in exactly the same position.If they overlap,proceed the next step.If there are not in same position,repeat the above steps.
26.Stick a tape to the laser head nozzle
27.Press”Pulse” to get a laser dot(pierce)through the tape
28.Check if the laser dot is in the center of the nozzle hole
29.Based on the current laser dot position,adjust the screws on the third mirror mount
30.Stick a new tape to the laser head nozzle
31.Press”Pulse” to get a laser dot(pierce)through the tape
32.Check if the laser dot is in the center of the nozzle hole.
If the laser dot is in nozzle hole center,mirror alignment is done.If not in center,repeat step 26 to step 32,till laser dot is exactly in the center of nozzle hole
33.Install the 2.5mm nozzle to the laser head,and move the laser head to bottom right corner.
34.Stick a tape to the laser head nozzle
35.Press”Pulse” t get a laser dot (pierce) through the tape
36.Check if the laser dot is in the center of the nozzle hole
If the laser dot is in nozzle hole center,mirror alignment is done.If not in center,repeat step 26 to step 32,till laser dot is exactly in the center of nozzle hole
37.Install the 1.5mm nozzle,after finishing adjusting with the 2.5mm nozzle
38.Move the laser head to bottom right
39.Stick a tape to the laser head nozzle
40.Press”Pulse” to get a laser dot (pierce) through the tape
41.Check if the laser dot is in the center of the nozzle hole
If the laser dot is in nozzle hole center,mirror alignment is done.If not in center,repeat step 26 to step 32,till laser dot is exactly in the center of nozzle hole
42.Now we finished mirror alignment