High-speed bright edge cutting of Fiber laser cutter

Use small nozzles and low air pressure with high power and high speed to cut carbon steel plates of different thicknesses.

To cut steel with a bright edge.

Features:

 The taper is small, and basically can reach the bilateral 0.2mm or less

Fast cutting speed

Smooth section, small roughness

If fiber laser power is not enough to cut steel with  high-speed bright edge.Its cutting edge will lool like below.

Features 

Thicker cutting

Large taper, ranging from 0.4-1mm on both sides

Slow cutting speed

The cross-section is frosted and has lines, and the roughness is large

Contact us for engineer support.

service@lasermetalcutter.com